CERTIFICATES AND REPORTS 

The documentation detailed below, only applies to the samples, equipment or assemblies tested. Responsibility of final conformity of the supplied products, of the same or similar designation, rests wholly with the manufacturer. 

CERTIFICATE OF VERIFICATION / TYPE TESTS 

 These Certificates are issued when a complete series of verification / type tests have been successfully performed against the appropriate product or assembly standard. 

 These tests are within our accredited scope as assessed by UKAS.  When additional tests are included, but not performed at our facility, these Laboratories also hold the necessary accreditation for the tests performed. 

CERTIFICATE OF SELECTED VERIFICATION / TYPE TEST(S) 

 These Certificates are issued when selected verification / type tests have been successfully performed against the appropriate product or assembly standard. The client/manufacturer has only requested for these selected tests to be recorded. These certificates do not confirm compliance of the samples tested, against all other clauses of the standard(s) stated.  

 These tests are within our accredited scope as assessed by UKAS. When additional tests are included, but not performed at our facility, these Laboratories also hold the necessary accreditation for the tests performed. 

TEST REPORT 

 A Test Report is issued when the client / manufacturer has requested the report of the result of a test, whether a pass or fail, when a specific test(s) has been performed against an appropriate clause of a product standard, which is either within our UKAS scope of accreditation or in the case where the test(s) is performed in accordance with the appropriate product standard and is within our capability. The report will state if the test(s) performed is within our UKAS scope. 

RECORD OF RESULTS 

 A Record of Results are issued when we are asked to report the results of a test(s) that has been performed, that may not be within our UKAS scope or to standards not within our UKAS scope, but are within our capability. It is not the intention of kA Testing Facility that the document provided, detailing the tests and results attained, should of itself, be interpreted as the suitability of the equipment for its use. 

These tests may be for R & D purposes or where there is not a relevant standard for the equipment, but a recognised tests method has been chosen to determine a level of due diligence. The test data provided is for the client / manufacturers use, in determining their satisfaction in the performance of the sample / equipment being sold on the market. 

TEST SUMMARY 

 This is a short single page document, issued at the client / manufacturers request, as a simple record of the result of a test(s) that has been performed, when tested against their chosen criteria. It is not the intention of kA Testing Facility that the document provided, detailing the tests and results attained, should of itself, be interpreted as the suitability of the equipment for its use. The test data provided is for the client / manufacturers use, in determining their satisfaction in the performance of the sample / equipment being sold on the market.  

kA Testing Facility,
John Street,
New Basford,
Nottingham,
NG7 7HL,
UK





    Thank you for your interest in kA Testing Facility. If you would like to get in touch, please call, email or use the contact form. We aim to respond to all enquiries within 24 hours.

    By using this form, you agree to the use of the data you supply in line with our privacy policy. For further information, please contact the office by phone.